White Bond W10
TDS
Quarter Quantity: 1, Liters
Gallon Quantity: 4, Liters
Drumi Quantity: 16, Liters
CALCULATE PAINT
Happilac White Bond W10 is a high-performance, cement-based adhesive formulated with High-Grade White Portland Cement, Polymer Modified and specially selected Fillers and Additives.
- Very good adhesion to most substrates (concrete, cementitious mortar, stone, bricks)
- Easy to mix and use
- Excellent workability and thixotropic consistency
- Excellent bond strengths
- Single component system
Happilac White Bond W10 Tile Adhesive is one-pack premixed adhesive consisting of high resistance cements, selected silicon/quartz mineral charges and specific additives, used as thin bed Tile Adhesive for permanent fixing of ceramic tiles. It is ready to use with the addition of water. Suitable for use in hot and tropical climatic conditions.
Application
W-10 Tile Adhesive is applied using notched trowel. The amount of product should be enough to ensure complete wetting of the tiles rear. Tiling has to be carried out on fresh glue, exerting an adequate pressure to ensure contact with the adhesive, and thus the perfect bonding. In case a surface film is formed on the adhesive, it is necessary to wipe the trowel on the adhesive layer previously applied. Avoid wetting with water the adhesive already applied, it damages the adhesive.
Health and Safety
- When applying, wear appropriate eye protection
- In case of eye contact with the product, rinse with plenty of water for at least 10 minutes
- Don’t breathe spray mist or dust
- Ensure proper ventilation when applying
- If swallowed, it may cause serious damage
- When empty, don’t use its sack for edible storage
- Keep out of reach of the children
- Pregnant women are advised to avoid breathing paint mist or spray
- In case of any emergency, undergo medical supervision as soon as possible.
CAUTION: Scraping/sanding off previously painted surfaces may release lead dust or fumes. Lead is highly toxic, take protective measures thoroughly when rubbing off the old surfaces.
Tips
- Don’t exceed the tile bond/water ratio
- Keep the product away from moisture and dampness
