Weatherguard Exterior Wall Putty
TDS
Quarter Quantity: 1, Liters
Gallon Quantity: 4, Liters
Drumi Quantity: 16, Liters
CALCULATE PAINT
Happilac Weatherguard Exterior Wall Putty is a 100% acrylic based putty. It is specially designed to fill blemishes and surface imperfections.
- Excellent whiteness and application
- High quality and filling properties
- Fast drying and smooth finish
- Excellent abrasion resistance
Happilac Weatherguard Exterior Wall Putty is 100% acrylic based putty. It is ready to use the product for filling blemishes, cracks, and holes on masonry surfaces and patching up surface imperfections on plastered walls. It is specially formulated for leveling minor surface irregularities.
It is recommended for both internal and external applications.
Appplication
Appropriate and good surface preparation significantly increases the top coat life and durability. Deploy skilled/experienced individuals for the application of paint. Surface to be painted must be dry, clean, and free from all contamination and efflorescent salts. Remove dirt, grease, and wax rubbing down using a suitable sandpaper. After surface preparation, apply one coat of Happilac Weatherguard Exterior Primer and let it dry completely. Apply 2-3 coats of of Happilac Weatherguard Exterior Wall Putty. Third coat of putty is recommended for extra smoothness. After surface preparation proceed with recommended Happilac Top coats.
Health and Safety
- When applying paint, wear appropriate eye protection.
- In case of eye contact with the product, rinse with plenty of water for at least 10 minutes.
- Don’t breathe in spray mist or dust.
- Ensure proper ventilation when applying paint.
- If swallowed, it may cause serious damage.
- When empty, don’t use its container for edible storage.
- Place out of reach of the children.
- Pregnant women are advised to avoid breathing paint mist or spray.
- In case of any emergency, undergo medical supervision as soon as possible.WARNING: Scraping/sanding off previously painted surfaces may release lead dust or fumes. L ead is highly toxic, take protective measures thoroughly when rubbing off the old surfaces.
Tips
- Drying time may vary depending on the weather and drying conditions.
- Ensure the correct primer or sealers are used
