Synthetic Metallic
TDS
Quarter Quantity: 1, Liters
Gallon Quantity: 4, Liters
Drumi Quantity: 16, Liters
CALCULATE PAINT
Happilac Synthetic Metallic is a high gloss and high luster paint with beautiful colors. It gives a very special look to the object painted with Happilac Synthetic Metallic Paint.
- High gloss and high luster
- Good coverage
- Resistance to mild chemical fumes attack
- Excellent resistance to abrasion
Happilac Synthetic Metallic is a high gloss and high luster paint with beautiful colors. It gives a very special look to the object painted with Happilac Synthetic Metallic Paint. It is based on alkyd resin with high color fastness pigments and speciality additives. It exhibits good resistance against alkali and mild chemical fumes attack.
Application
Appropriate and good surface preparation significantly increases the topcoat life and durability. Deploy skilled/experienced individuals for the application of paint.
Surface to be painted must be dry, clean and free from all contamination. Remove dirt, grease and waxy material. Scuff with suitable sand paper, dust off and apply 01 coat of Happilac Red Oxide Primer on metal surfaces and Happilac Synthetic Undercoat on wooden surfaces.
Allow the surface to dry out completely and apply 2-3 coats of Happilac Synthetic Metallic.
Health and Safety
- When applying Paint, wear appropriate eye protection.
- In case of eye contact with the product, rinse with plenty of water for at least 10 minutes.
- Don’t breathe in spray, mist and dust.
- Ensure proper ventilation when applying paint.
- If swallowed, it may cause serious damage.
- When empty, don’t use its container for edible storage.
- Place out of reach of the children.
- Pregnant women are advised to avoid breathing paint mist or spray.
- In case of any emergency, undergo medical supervision as soon as possible.
WARNING: Scraping/sanding off previously painted surfaces may release hazardous dust or fumes which may be highly toxic; take protective measures when rubbing off the old surfaces.
Tips
- Drying time may vary depending on the weather and drying conditions.
- Ensure the correct primer or sealers are used.
