Synthetic Clear Varnish
TDS
Quarter Quantity: 1, Liters
Gallon Quantity: 4, Liters
Drumi Quantity: 16, Liters
CALCULATE PAINT
Happilac Synthetic Clear Varnish is an air-drying solvent-based varnish having superb gloss and excellent abrasion resistance. It is used for enhancing the gloss of synthetic enamel. It is based on alkyd resin and high-performance solvent with specialty additives.
- Long-lasting high gloss.
- Resistant to mild chemical fumes attack.
- Resistant to the levels of atmospheric humidity present in normal interior and exterior environments.
Happilac Synthetic Clear Varnish is an air-drying solvent-based varnish having superb gloss and excellent abrasion resistance. It is used for enhancing the gloss of synthetic enamel. It is based on alkyd resin and high-performance solvent with specialty additives.
Appplication
Appropriate and good surface preparation significantly increases the topcoat life and durability. Deploy skilled/experienced individuals for the application of paint.
The surface to be painted must be dry, clean, and free from all contamination. Remove dirt, grease, and waxy material. Scuff with suitable sandpaper, dust off, and apply Happilac Synthetic Clear Varnish in 2-3 coats. Ensure the proper drying interval for each coat.
Health and Safety
- When applying Paint, wear appropriate eye protection.
- In case of eye contact with the product, rinse with plenty of water for at least 10 minutes.
- Don’t breathe spray mist or dust.
- Ensure proper ventilation when applying paint.
- If swallowed, it may cause serious damage.
- When empty, don’t use its container for edible storage.
- Place out of reach of the children.
- Pregnant women are advised to avoid breathing paint mist or spray.
- In case of any emergency, undergo medical supervision as soon as possible.
WARNING: Scraping/sanding off previously painted surfaces may release lead dust or fumes. Lead is highly toxic;take protective measures thoroughly when rubbing off the old surfaces.
Tips
- Drying time may vary depending on weather and drying conditions.
- Ensure the correct primer or sealers used
