Happilac Thermoplastic Road Marking Paint
TDS
Quarter Quantity: 1, Liters
Gallon Quantity: 4, Liters
Drumi Quantity: 16, Liters
CALCULATE PAINT
Happilac Thermoplastic Road Marking Reflective is hot-applied road marking paint that consists of light-colored aggregates, pigments, extenders, and glass beads bound together with a thermoplastic resin, plasticized as necessary.
- High performance (Day and Night)
- High durability, reflectivity, visibility and good color stability
- Best adhesion on asphalt and concrete by heat fusion
- Outstanding retention of Glass Beads
- High heat stability and highly washable
- High reflective properties
- High Skid Resistant
Happilac Thermoplastic Road Marking paint is a premium product for road marking. It is hot melt road marking paint, a kind of powder paint which consists of light colored aggregates, pigments, extenders, and glass beads bound together with a thermoplastic resin, plasticized as necessary. When in molten state after heating, it is applied hot to road surfaces using screed or extrusion application. This product is manufactured according to British Standard specifications BS 3262.
Happilac Thermoplastic Road Marking paint is made of highly reflective materials, which makes it a lot easier to see even in bad weather or any situation where visibility is poor. Apart from this, it helps in raising the awareness of approaching danger spots and tells drivers to keep proper control in their speed.
Appplication
Material must be placed into a pre-heater fitted with a mechanical stirrer and the thermometer. When the material has been heated to its application temperature, around 200±20oC, carefully transfer to the application equipment, and proceeds with use, the maximum safe heating temperature of 220oC should not be exceeded. Material may be applied by the screed, extrusion, and spray method using either machine or hand screed equipment to the following thickness.
Screed Lines: 1.5-5.0 mm
Sprayed lines(other than yellow): ≥1.5mm
Sprayed yellow edge lines: ≥ 0.8mm
Extruded lines: 1.5-3.5mm
Coverage: 3.kg/m2 @ 1.5mm
Health and Safety
- When applying paint, wear appropriate eye protection.
- In case of eye contact with the product, rinse with plenty of water for at least 10 minutes.
- Don’t breathe spray mist or dust.
- Ensure proper ventilation when applying paint.
- If swallowed, it may cause serious damage.
- When empty, don’t use its container for edible storage.
- Place out of reach of the children.
- Pregnant women are advised to avoid breathing paint mist or spray.
- In case of any emergency, undergo medical supervision as soon as possible.
CAUTION: Scraping/sanding off previously painted surfaces may release lead dust or fumes. Lead is highly toxic;
take protective measures thoroughly when rubbing off the old surfaces.
Tips
- Drying time may vary depending on weather and drying conditions.
- Appropriate preparation of the substrate is required for stronger adhesion.
